ST-52

ST-52H


Havuz damper gövdesi ST 52 sertlikte aşmamaya ve darbelere dayanıklı sacdan imal edilmekte olup, kaya ve hafriyat için kullanımlarda tercih edilmektedir.

General Features

DAMPER BASE
6 - 8 - 10 mm ST-52 material is produced.


DAMPER CHASSIS
N.P.U. It is produced from 200 materials and it is produced in accordance with high strength and transportation in all kinds of loads and road conditions.


TIPPER REAR COVER
Door type: 6 - 8 - 10 mm ST-52 is an automatic hydraulic cylinder system that will be made of sheet metal and 6 mm frame outside.
Reinforcement profiles: 6 mm "U" is made from the bending profile, reinforcement is placed around the cover.


DAMPER LIFTING SYSTEM
Lifting System: HİDROMAS Brand 155 - 4 - 4100 A Telescopic Cylinder is used with minimum 25 tons capacity.
Lubrication: All moving parts in the locusts and arms can be painted with grease and grease lubrication can be done.


HYDRAULIC PUMP
Type: 40-87 DPA Gear type pump is used.
Test pressure: 250 bar.
Control system: With electric or air control system, control valves can be mounted to easily reach to the driver's place.


STANDARD ACCESSORIES
Rope hook for tarpaulin: Forged hooks are welded on the sides of the damper and on the back cover.
Mudguards: The vehicle's rear wheels are mounted on the front and rear of the frame and welded to the frame.
Tool box: The tool box made of 1.5 mm sheet shall be mounted in a suitable place.
Stair: The damper is made to be fixed in place of the pipe.
Rear warning reflectors and strip reflectors are adhered.


VEHICLE-DAMPER CONNECTION AND PAINT
Connection plates made of 8-10 mm sheet fastened on the chassis with bolts are welded to the upper damper frame and the vehicle and damper frames are fastened together and the fastening bolts are tightened with bolts. Then all surfaces are painted with primer before cleaning. Places that are necessary will be put in steel paste. The bottom surface of the damper and the subframe are painted in two layers with the paint color used in the vehicle chassis, and the other surfaces of the damper are painted with a two-layer primer.

HIGH QUALITY
INTERNATIONAL STANDARDS
STRONG NETWORK SERVICE
HIGH PERFORMANCE
LONG-LASTING USE