CHARACTERISTICS OF LOWBED CHASSIS
Lowbed chassis; Steel product 250 mm N.P.U.
Base plate-shape; Product made of 8 mm sheet metal.
Lowbed chassis is supported from the bottom by NPI longitudinally. To prevent slippage of the plate between the motors. A place necessary for the manufacture of a 20x20 square made in welded assembly.
Mechanical loading ramp with vehicle. Square iron weld at 200 mm and 20X20 angles to maintain the pallets or vehicle mounted on the boom.
DIMENSIONS OF THE LOADING RAMP
Foldable ramp height: 1670 mm
Total height of the ramp: 3435 mm
Width of the ramp: 650 mm
Raccod with tight bolts of fixation with a blinds of connection of plaks in connection with steel in 8-10 mm souded on chassis of Lowbed and the chassis of the ingen
Paint by undercoat after cleaning of surface of bodywork. In case of necessity, will be masticated in steel putty. Painted with two coats at the same lower surface color of the chassis and chassis of the vehicle, other surfaces of the Lowbed painted two-layer underlay and top of the finish.
Wooden extension device (200mm)
Cargo lashing rings
1 x tool cabinets.
1 Lockable Tool Box Part.
2 pieces dust mat.
1 piece place spare wheel.
Reflector 2 pieces