LIGHT COMMERCIAL DAMPER

SK-HTDK


General Features

DAMAGE BASE
Manufactured from 3 - 4 mm sheet metal fabrication.


DAMPER CHASSIS
N.P.U. It is manufactured from 120 materials and it is produced in accordance with high strength and transportation in all kinds of load and road conditions.


HARMONY REAR COVER
Cover type: The system is made of 4 mm sheet and 6 mm out of the frame opening system is automatic hydraulic cylinder system.
Reinforcement profiles: 2 mm "U" is made from the twist profile, the cover is placed in the environment reinforcement.


DAMPER LIFTING SYSTEM
Lifting System: HİDROMAS Brand 116 - 3 - 3075 A Telescopic Cylinder Used.
Lubrication: All moving parts in the locusts and arms can be painted with grease and grease lubrication can be done.


HYDRAULIC PUMP
Type: 30-82 DPA Gear pump.
Test pressure: 250 bar.
Control system: The electric or pneumatic control system, ie the control valve, can be installed in a location accessible to the driver's compartment.


STANDARD ACCESSORIES
Rope hook for tarpaulin: Forged hooks are welded on the sides of the damper and on the back cover.
Mudguard: The vehicle's rear wheels are mounted on the back of the vehicle and welded to the frame.
Tool box: The tool box made of 1.5 mm sheet shall be mounted in a suitable place.
Ladder: Damper by making fixed images instead of fixed on the pipe.
Reflectors and reflectors.


VEHICLE-DAMPER CONNECTION AND PAINT
8-10 mm steel plate on the vehicle chassis, anchor plate made of 8-10 mm sheet, vehicle and damper chassis is searched and connection solutions are made with reinforcing nuts. Then all surfaces are painted with primer before cleaning. The necessary landscapes will be put on the steel paste. Damper is painted with two coats on the lower surface and the paint color used in the vehicle chassis, and on the other surfaces of the damper, with two coats of paint on the last coat.

HIGH QUALITY
INTERNATIONAL STANDARDS
STRONG NETWORK SERVICE
HIGH PERFORMANCE
LONG-LASTING USE